SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析

2017-05-23  by:CAE仿真在線  來源:互聯網

Most audiophiles say that there is something warmer, richer, and better to the sound a vinyl record reproduces, especially compared to modern digital media. Not having listened to an album since I was young, I figured it was time to see what all the talk was about. I asked my father (long time high-end audio enthusiast) to get out his vintage 1973 JVC VL-5 turntable so we could give it a listen.. \! C7 B- n2 U! |* C& N% t# }, s
SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation分析圖片1 5 j- K9 r9 Q% @# J: x! z

Note: This picture is post installation of the new feet.

After all these years in storage the turntable was in great shape. Everything worked perfectly except for the vibration isolating rubber feet. Out of the four feet, three had the material break down, leaving them brittle and cracking with large sections missing or crumbling. Obviously this was not good news as the turntable needs to sit level when in use

SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation分析圖片2

I searched the internet for replacements but could not find any that were suitable. The next step was to make our own. Using Solidworks, my father reverse engineered a new set of feet for the turntable. After a few design iterations, the new feet were a little more stout than the originals. Thanks to SOLIDWORKS SImulation, the new feet exhibited the mechanical properties we desired.

SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation分析圖片3

We did not know the type of rubber used in the original foot. This was not a problem as we used Simulation Premium and the Nonlinear material models to determine a relative stiffness. By physically testing the original foot under a 2.5 lb. vertical load we measured a 0.1 in. displacement. Using Simulation and varying the material properties we found that a Shore Value of 70, gave a 0.095 in.corresponding vertical displacement. Feeling confident in the design the next step was to test for vibrational characteristics.

SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation分析圖片4SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation技術圖片5

The turntable operates at 33 1/3, and 45 RPM. This equates to 0.556, and 0.75 Hz respectively. SOLIDWORKS Simulation Professional made it possible to test the resonant frequency of the design. The analysis results predicted the lowest resonant frequency at 16.32 Hz. This is well above the induced vibration due to the turning motor and drive mechanism, and lower than the 20,000-20 Hz most receivers output.

SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation技術圖片6

Next we turned to the Stratasys Polyjet line of printers that delivered an amazing print. The Polyjet printed a 70 Shore value model that behaved just like we expected. Not only did the print physically work, it looked great too.

SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析solidworks simulation技術圖片7


開放分享:優質有限元技術文章,助你自學成才

相關標簽搜索:SolidWorks Simulation:黑膠唱片機蓋支撐墊的模態分析 SolidWorks培訓課程 SolidWorks設計教程 SolidWorks視頻教程 SolidWorks軟件下載 SolidWorks在建筑室內設計工業設計的應用 SolidWorks基礎知識 SolidWorks代做 Fluent、CFX流體分析 HFSS電磁分析 Ansys培訓 Abaqus培訓 Autoform培訓 

編輯
在線報名:
  • 客服在線請直接聯系我們的客服,您也可以通過下面的方式進行在線報名,我們會及時給您回復電話,謝謝!
驗證碼

全國服務熱線

1358-032-9919

廣州公司:
廣州市環市中路306號金鷹大廈3800
電話:13580329919
          135-8032-9919
培訓QQ咨詢:點擊咨詢 點擊咨詢
項目QQ咨詢:點擊咨詢
email:kf@1cae.com