SCI論文的那些事@投稿的流程（下）

9.一般SCI文章都會需要寫一個Cover letter,請問這個該怎么寫?寫的時候需要注意什么?

給大家個我的模板吧,拋磚引玉。

Dear Professors:

We submit our manuscript entitled “XXXX(你論文的題目)” to International Journal XXX(雜志名稱)。

We the undersigned declare that this manuscript entitled “XXXX(你論文的題目)” is original, has not been published before and is not currently being considered for publication elsewhere. We confirm that the manuscript has been read and approved by all named authors and that there are no other persons who satisfied the criteria for authorship but are not listed. We further confirm that the order of authors listed in the manuscript has been approved by all of us. We understand that the Corresponding Author is the sole contact for the Editorial process. He is responsible for communicating with the other authors about progress, submissions of revisions and final approval of proofs. (原創聲明,作者確認,通訊等等)

The present work constitutes a continuing study on the XXX. The proposed imperfect interface model is XXX .... By virtue of the XXX method, the XXX.... is obtained. (前面是論文的選題和求解思路) The main innovations is that, based on our solution given by Eq. (39), it is also possible to determine XXX..... Particularly, numerical results demonstrate that XXX....; and the fiber interface stress effect XXX.... (后面寫創新點)

Some possible experts in the area are provided as follows:

1.Professor Zhu XXX....

Institution: Chinese Academy of Sciences

E-mail: XXX....

Research interest: XXX....

2. XXX....

3. XXX....

4. XXX....

5. XXX....

Thank you very much for yourattention and consideration.

Sincerely yours, XXX.....

March 16, 2016

Contact information:

XXX

Adress: School of XXX, XXX University, Xi’an, XXXX, Shaanxi, China

E-mail: xxx@yeah.net

Mobile: +86 18717XXXXXX(手機號)

10.一般SCI文章都會需要寫一個Highlights,請問這個該怎么寫?寫的時候需要注意什么?

我也是剛開始嘗試Highlights,最近雜志才開始要求的。Highlights一般就是4-5句短號,或者名詞。給大家個我的模板吧,拋磚引玉。

The elastic-plastic problem of doubly periodic cracks is solved. (我的研究?jī)?nèi)容)

The influence of plasticity around the crack tip is addressed. (具體我考慮的那個因素的影響)

A highly accurate approach is put forward by avoiding double infinite summation. (我模型的特點,優勢,我的是高精度,順便說了實現的方式)

A new identity suitable for periodic cracks research is put forward first and proved. (工作的可推廣性,應用)

An analytical formula is obtained for calculating SIF with a reliable precision. (我最想讓別人記住或者使用的東西,我意思說我們的東西看不懂也行,用我最后得到的簡單公式吧)

類似的寫即可。就相當于用最少的話說清楚自己的創新點和特色。下面一個例子是按模型、求解方法、驗證、主要結果的模式寫的。

The doubly periodic interfacial crack in a layered periodic composite is studied.

The skills for periodic collinear and periodic parallel cracks are used together.

A comparison with known solutions verifies the validity of our solutions.

There exists a coupled effect of geometrical and physical factors on crack behavior.

The shielding effect and amplifying effect of multiple cracks exist simultaneously.

再舉一個新例子是按問題,模型、成果、驗證、結論的模式寫的。

The fibrous nano-composites with imperfect interface are investigated.

The imperfect interface, nano interface stress, and fibersection shape are considered.

The closed from solution of the effective antiplaneshear modulus is obtained.

Five previoussolutions can be regarded as the limit cases form the present expression.

The interfacial imperfection causes a reduction in the effective shear modulus.

11.寫出的文章適合投哪一個級別的、哪一個類型的期刊(對本方向的有關的期刊不了解)

看看你的參考文獻是哪個區的,看看自己的文章有沒有比參考文獻的好,這樣差不多就知道自己的水平就是那個左右啊。

不了解的時候,把摘要粘在下面的網站,慢慢選吧

選擇投哪個SCI:http://www.edanzediting.com/journal_selector

12.審稿人是怎么審定你的文章是成功的,是可以發表的。

這個比較難說,首先是學術水平的估計吧,上面說過,一看稿子排版的寫作就是新手,這樣如果有找出論文的邏輯問題的話,會直接悲劇的。

一篇合格的論文必須掌握以下事情:

一門編程語言或?qū)嶒?yàn)、一些的理論與數學化描述、專業化的術語與合理的結果分析、合格的排版、模型圖及結果的繪制和整理、數據庫,手冊,已有文獻的實驗或理論結果的分析和整理、無錯誤的英語表述、學術貢獻、思想、以及一些運氣。

這說難也難,說簡單也簡單。作為一個學術工作者,更應該把這些當做素質來自己培養。

13.為什么忌諱一稿多投。我們還要忌諱哪些?

前段時間山東大學一教授學術不端,一稿多投,被外國網站揭發了。詳情請看

學術不端|山大教授Top期刊論文被外網站揭發

一稿多投不是忌諱不忌諱的問題。你說你準丈母娘把你女朋友同時和3家的人定個親,你開心嗎。一稿多投是極不負責的學術行為,要是你投的國外雜志被發現了,不僅是你,整個課題組都要遭殃。我身邊有老師因?yàn)楸粍e人重投了自己的論文,上長江的時候,第二輪公示期被揭發了。這種重大錯誤,錯就錯了,即使是別人坑的你,你也是沒法解釋的。

生物化學家、中科院院士鄒承魯提過學術腐敗七宗罪:

一、抄襲剽竊他人成果。二、偽造篡改實驗數據。三、隨意侵占他人科研成果。四、重復發表論文。五、學術論文質量降低和育人不負責任。六、學術評審和項目申報中突出個人利益。七、過分追求名利,助長浮躁之風。

這七宗罪不是你要忌諱,是底線,不可觸摸的。犯了就是階級矛盾,遲早會被學術界踢出大門的。

千萬不要一稿多投。名譽攢起來不容易,丟起來只要一件小事就做到了。

14.你投出去的文章被別人審閱后,不同意,但是審閱人卻學到了你的方法或者理論,會不會他拿去用?

這個放心,你投稿日期是有的。如果他學到了你的方法或者理論,先發表了。你就可以給期刊編輯寫信,附上自己當初的投稿記錄。還是上面那句話,名譽攢起來不容易,丟起來只要一件小事就做到了?？赡芤幌伦?就把他打趴下了。

別總是太小心的活著,要大膽的嘗試、失敗、再嘗試。要不你就成功了,要不你就習慣了。

當你正在看到這里時,是不是對SCI的入門有了一些的認識,讓你覺得所謂的“神壇”似乎離你又近了很多呢!但是,也可以看出,想投中一篇SCI,并不是那么容易的事情,所以啊,提高自身實力,才是問題的關鍵。加油吧,騷年嗎!年輕時候多努力,咬咬牙堅持下,爭取你的第一篇吧!